
Polyethylene storage shelter for 4 drums - 485 liters
This closed polyethylene containment shelter, reference BPFJ485, is ideally designed for the storage of 4 drums of up to 220 liters. It can also accommodate other containers (cans, cubis, etc.) with a storage capacity of 880 liters. Retention capacity is 485 liters.
Features
- Enclosed polyethylene containment shelter for storing 4 drums
- Overall dimensions: 1565 x 1730 x 2110 mm
- 485-liter capacity
- Weight: 158 kg
- Opens with a curtain on both sides
- Yellow and black
By quote
Detailed Description
Design and Uses
Material and grating
It is made of 100% linear low-density polyethylene (LLDPE). This material is valued for its strength, impact resistance, and puncture resistance. The grating is also made of 100% linear low-density polyethylene, allowing it to support a pallet or drums placed directly on the grating. The maximum (distributed) load capacity is 1,250 kg. The enclosed containment shelter, or containment box, is equipped with a curtain that opens in both directions. It can be locked with a padlock (not included). The roof allows rainwater to drain away. This shelter has sufficient space to store pumps, mixers, funnels, and more.
Products in Stock
This enclosed containment shelter is suitable for storing primarily corrosive products. Acidic products (pH 0 to 5) or alkaline products (pH 9 to 14) must be stored in this polyethylene tray. Polyethylene ensures maximum resistance in the event of an accidental spill of a corrosive chemical. This tray can also be used to store other polluting or hazardous liquids (hydrocarbons, AdBlue, liquid waste, etc.).
Material Handling and Logistics
It can be handled using a manual pallet jack, stacker, or forklift thanks to its fork slots. The bin weighs 158 kg. This retention shelter is recommended for both outdoor and indoor storage. The enclosed retention shelter is delivered as a kit (including fasteners) to optimize shipping; installation instructions are provided, and a video may be available to help you assemble the retention shelter.
Regulations and Delivery
Reminder of regulations concerning the decree of October 4, 2010. Retention capacity must be at least equal to : 100% of the volume for a single container, or 50% of the total volume for several containers, without being less than 100% of the volume of the largest container. For companies classified as ICPE subject to declaration or prefectoral authorization, please refer to the departmental health regulations. All our standard products are available with a maximum delivery time of 2 weeks throughout mainland France.
Technical specifications
Documents to download
Specific Features
| Dimensions (L × W × H) | 1565 x 1730 x 2110 mm |
|---|---|
| Storage capacity | 880 liters |
| Retention Capacity | 485 liters |
| Curb weight | 158 kg |
| Load capacity | 1,250 kg |
| Standard finish | yellow and black |
Similar products
-
Polyethylene bund with grating for storage of 1 IBC - 1260 liters
By quote -
Polyethylene drip tray with grating for storage of 2 IBCs - 1200 liters
By quote -
Polyethylene retention shelter for storage of 2 drums - 250 liters
By quote -
Polyethylene containment shelter for storage of 1 IBC - 1260 liters
By quote




