
Polyethylene retention shelter for storage of 2 drums - 250 liters
This polyethylene holding box or holding shelter, reference BPFJ250, is ideally designed for the storage of 2 drums of up to 220 liters. It can also accommodate other containers (cans, cubis, etc.) with a storage capacity of 440 liters. Retention capacity is 250 liters.
Features
- Closed polyethylene spill containment box for storing 2 drums
- Overall dimensions: 1565 x 1095 x 2110 mm
- 250-liter capacity
- Weight: 101.5 kg
- Opens with a curtain on both sides
- Yellow and black
By quote
Detailed Description
Design and Uses
Material and grating
It is made of 100% linear low-density polyethylene (LLDPE). This material is valued for its strength, impact resistance, and puncture resistance. The grating is also made of 100% linear low-density polyethylene, allowing it to support a pallet or drums placed directly on the grating. The maximum (distributed) load capacity is 650 kg. The containment shelter or containment box is equipped with a curtain that opens in both directions. The roof allows rainwater to drain away. This shelter has sufficient space to store pumps, mixers, funnels, and other equipment.
Products in Stock
This bin is suitable for storing mainly corrosive products. Acidic (PH 0 to 5) or basic (PH 9 to 14) products should be stored in this polyethylene bin. Polyethylene guarantees maximum resistance in the event of an accidental spill of a corrosive chemical product. It can also be used to store other polluting or hazardous liquids (hydrocarbons, AD Blue, liquid waste, etc.).
Material Handling and Logistics
It can be handled using a manual pallet jack, stacker, or forklift thanks to its fork slots. The bin weighs 101.5 kg. This bin is recommended for both outdoor and indoor storage. The spill containment shelter or spill containment box is delivered as a kit (including fasteners) to optimize shipping; installation instructions are provided, and a video may be available to help you assemble the spill containment shelter.
Regulations and Delivery
Reminder of regulations concerning the decree of October 4, 2010. Retention capacity must be at least equal to : 100% of the volume for a single container, or 50% of the total volume for several containers, without being less than 100% of the volume of the largest container. For companies classified as ICPE subject to declaration or prefectoral authorization, please refer to the departmental health regulations. All our standard products are available with a maximum delivery time of 2 weeks throughout mainland France.
Technical specifications
Documents to download
Specific Features
| Dimensions (L × W × H) | 1565 x 1095 x 2110 mm |
|---|---|
| Storage capacity | 440 liters |
| Retention Capacity | 250 liters |
| Curb weight | 101.5 kg |
| Load capacity | 650 kg |
| Standard finish | yellow and black |
Similar products
-
Polyethylene retention bin with grating for storage of 2 drums - 200 liters
By quote -
Polyethylene retention bin with grating for storage of 4 drums - 400 liters
By quote -
Polyethylene containment shelter for storage of 1 IBC - 1260 liters
By quote -
Polyethylene bund with grating for storage of 1 IBC - 1260 liters
By quote




