

Sheet-metal storage container with containment for 3 to 18 IBCs or Euro pallets
This hazardous materials container, made of sheet steel for storing 3 to 18 1,000-liter IBCs or a 1,200 x 800 mm Euro pallet, part number CTS4-1IBCPC, has a containment capacity that complies with the French standard set forth in the Decree of October 4, 2010, as amended (bottom containment, but we can provide containment on each level).
By quote
Detailed Description
Design and Uses
Material and Construction
The container’s structure is mechanically welded using high-flexibility, high-strength carbon steel profiles that are assembled and welded together in accordance with structural requirements using calibrated MIG welding equipment. The floor drain pan is made of 3 mm thick steel. The container’s legs are 100 mm high and are equipped with mounting plates so they can be bolted to the floor if necessary. The doors are equipped with two double-latch key locks with stainless steel latches to secure both sides of the container. The rear wall is made of hot-dip galvanized, deep-ribbed corrugated sheet metal. The side walls and roof are made of galvanized sheet metal that has been profiled and press-formed, and are attached to the frame using large-headed, watertight rivets. All of our containers and portable buildings are painted with C4-grade paint.
Products in Stock
The container features two stacked storage levels designed in accordance with the UNI 10011 standard. The storage levels are made of pressed, edged, and hot-dip galvanized grating with a 44 x 33 mesh that can be removed if necessary and has a load capacity of 1,000 kg/m².
Installation and Use
This container is equipped with sliding doors consisting of two panels made of mineral wool sandwich panels clad with galvanized sheet metal on both sides, 50 mm thick, EI30-certified (fire reaction class a2 s1-d0), enclosed in a frame made of galvanized carbon steel profiles, with an integrated locking system, a door locking system for movement, and certified dual-carriage accessories for a monorail sliding system. The container can be moved using a forklift with adequate capacity or, with a crane, by using the special certified lifting eyes located on the container’s roof. A concrete slab is required to support this range of retention cabinets; otherwise, at a minimum, foundation beams must be provided.
Security
The safety blocks mounted on the rear of the storage compartments—properly sized to protect the rear wall—are made of EN 10219 rolled steel profiles. The container is equipped with 4 ventilation grilles mounted on the doors. The entire system can be connected to an audible and visual alarm in the event of a malfunction. The safety cabinet is supplied with a technical data plate and a safety monitoring panel. It complies with the international standard UNI EN ISO 3834-2:2021, certificate no. 523-088-2012 issued by TÜV Italia, and the essential requirements for safety and environmental protection.
Options and Customization
Versions and Custom Solutions
The storage capacity complies with regulations requiring 50% of the total storage volume, but we can also provide custom solutions based on your specifications. We can also offer swing doors if you wish. Several options are available: sheet metal, insulated, with rock wool sandwich panels ranging in thickness from 50 to 120 mm, temperature-controlled (e.g., 20 degrees ± 5 degrees), frost-proof (minimum 3 degrees guaranteed), 1-hour fire-rated, 2-hour fire-rated, REI120 (REI 120).
Optional Equipment
Electrical panels are available in 220V single-phase or 380V three-phase versions (with or without a neutral).
Coating and Finish
We can also offer you other grades of paint based on your specifications.
Technical specifications
Documents to download
Specific Features
| Standard finish | White |
|---|






